Industrial-Grade Circuit Protection Relay for Optimal Equipment Safety

• Customization: Available
• Theory: PCB
• Usage: Household Appliances Relay, Industrial Control Equipment
• Model NO.: 2C
• Phase: 1
• Electricity Type: Ac
• Number of Pole: 1
• Load: High Power Relay
• Action Principle: No/Nc
• Contact Form: 2c4c
• Contact Resistance: 100 MΩ
• Contact Rating: 5A 240VAC/30VDC
• Switching Capacity: 2c:150W/1100 Va 4 C :90 W/ 660 Va :150 W /1100 Va
• Switching Current: 5A
• Switching Voltage: 250 VAC/30VDC
• Contact Material: AG Alloy
• Insulation Resistance: 500MΩ 500VDC
• Dielectric Strength: 1000VAC,1min.Between Coil to Contacts 1500VAC,1mi
• Operate Time: 25 Ms
• Release Time: 25 Ms
• Vibration Resistance: 10-55Hz, 1.5mm
• Shock Resistance: Malfuntion:100m/S2;Mechanical:1000m/S2
• Humidity: 35％ ~ 95％Rh
• Ambient Temp: -40℃ ~ +70℃
• Transport Package: Carton Package
• Specification: Standard
• Trademark: Xinyan
• Origin: Yueqing, Zhejiang, China
• HS Code: 853641109
• Production Capacity: 200, 000PCS/Year

Product Description

 

Product Description

Signal relay

Applications:
Suitable for applications where function and time requirements are known.
Time switch, it is possible to be used for pump delay time after switching , heating off, 
switching off fans


Technical parameters

CONTACT DATA 

Contact combination	2C4C
Contact resistance (Initial)	100mΩ (1A 6VDC)
Contact rating	5A 240VAC/30VDC
Switching capacity	2C:150W/1100VA 4C:90W/660VA:150W/1100VA
Switching current	5A
Switching voltage	250VAC/30VDC
Contact material	AG Alloy
Insulation resistance	500MΩ (500VDC)
Dielectric strength	1000VAC,1min.between coil to contacts 1500VAC,1min. between open contacts
Action time	25 ms
Release time	25ms
Vibration resistance	10-55Hz, 1.5mm
life - Electrical - Mechanical	1×10^5 ops (at rated coil voltage) 1×10^7 ops
Ambient temp	-40ºC ~ +70ºC

Coil Specifications 23ºC



Notes:

1) All values unspecified are at room temperature.

2) Only typical loads are listed above. Other load specifications can be available upon request.

3) For sealed type, the vent-hole cover should be excised. 


ORDERING INFORMATION
 
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT (Unit: mm)
Tolerance±0.3

Remark:

1) In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm; outline dimension>1mm and ≤5mm, Tolerance should be±0.3mm; outline dimension>5mm, tolerance should be ±0.4mm.

 2) The tolerance without indicating for PCB layout is always ± 0.1mm.